I recently explored an abandoned waterpark in the Mojave Desert at night. The park has been abandoned since 2004. I was drawn to the entrance, and I thought I could create some great shadows with this. 

I’ll break down the process behind creating this image using a handheld light. Although I used a ProtoMachines LED2, you can use any decent LED flashlight to create this image.

Three steps to creating the image

1. Illuminate the entrance sign

Using a warm white light, I stood to the left of the structure to illuminate the entrance sign. Although I illuminated the entire structure, I focused on illuminating the sign a little more.

2. Light the columns

I then stood behind each of the back columns, taking a few steps back. I then shined my light on each of the two columns, keeping the angle the same while moving the light so that it would create well-defined shadows on the ground. I took care not to shine the light directly into the camera lens.

3. Shine on the turnstiles

Squatting down behind each of the turnstiles, I shined the light behind them, once again blocking them from shining directly into the camera lens. This time, I used a shorter duration than I did for the columns since I was closer to the ground and didn’t want to blow out the details by overexposing.

At one time, this waterpark featured waterslides where you could achieve speeds of up to 50 mph and slide down on your feet. Now, it’s more popular with taggers, skateboarders and urban explorers.

Fisheye

I used a Rokinon 12mm f/2.8 fisheye lens. The distortion from the fisheye can create a surreal effect and look different from most other people’s images. However, you do need to be careful that you do not shine the light in the image. After all, the lens has a 180° diagonal angle of view on a full-frame camera, so it’s very easy to think you are out of the frame!

Advantage of a handheld light

It would be challenging to create this sort of lighting with lights on stands. Part of the reason for this is because you would need to mimic the movements that I do while holding the light, gently “painting” the objects with light through movement.

It would also be time-consuming. You would need to use at least five lights to recreate this, all on stands. You would need at least four to backlight the structure, and another off to the side to illuminate the sign. And for the last light, it would be difficult to aim it for longer periods of time at the sign than the structure.