Share this post with your friends:
Share on facebook
Facebook
Share on twitter
Twitter
Share on linkedin
LinkedIn
Share on email
Email
Share on facebook
Share on twitter
Share on linkedin
Share on email

No Sippy Cups here, just Baby Plates

Some of the most used tools on a Hollywood set are C-Stands and Apple Boxes. Then there are these little babies, Baby Plates. What is a Baby Plate you ask? It’s a 5/8 stud, about 3″ tall, welded onto a 3.5″ x 6″ metal plate. It has many uses. Allow me to share a few of those that I’ve used on the set.

One of the most common uses for a Baby Plate is a very low light stand:Light StandIt has a very solid feel and is very stable for most strobe heads. As you can see in the picture, this Baby Plate has 8 holes in its base. Some will have 4. The purpose for those holes is to be able to mount it in various ways. This brings up another very cool use for a Baby Plate:RafterYou can mount a Baby Plate onto your garage rafter or ceiling pending on how your studio is set up. The reason I love this setup is because if you’re using a hair light or background light to create separation on your talent, you know how I love to create depth in my lighting. The Baby Plate mounted on the ceiling opens up your studio floor space eliminating the use of a light stand that could clutter up your floor. Now let me emphasize something very important here. Anytime you’re going to mount or hang something that is going to be above your talent, you must secure it safely! StarpNotice that I’m using an aircraft cable with a locking d-link mounted onto the Baby Plate. Should the strobe head come loose, it will be secured with the aircraft cable. When I’m shooting, I always practice Safe Sets! Always! It’s a great recipe for success. Here’s another way to mount a Baby Plate:Wall MountSecurely fastened to a wall, again not screwed into drywall. Find a stud (I know what you’re thinking), or if the area where you need to mount the Baby Plate is between studs, make sure you use the appropriate drywall screw fastener for the weight of the strobe head and the Baby Plate. Here is another type of Baby Plate for mounting on a wall:L-BracketIt’s a L-Bracket, these are great when you want to get your strobe head out a bit from the wall because of the reflector or umbrella you might have mounted onto the strobe head. It enables you to adjust the light more than just the standard Baby Plate. Think Safety! This technique is also great for getting those light stands off the valuable studio floor.

Now let’s think outside the box a little bit. Here’s a creative way to use a Baby Plate:Round WoodI went to Home Depot and purchased a pre-cut pine round 1″ x 17.75″ piece of wood, mounted the Baby Plate to it then secured it onto a short C-Stand:C-StandCan you see where I’m going with this? Put some fabric and an old looking phone on it, and it becomes a nice table to dress your set with.TableNow that’s cool! There are so many wonderful ways to use Baby Plates. Be creative! Where do you get a Baby Plate you may ask? HeroB&H has a great selection, here’s the link: <http://www.bhphotovideo.com/c/search?N=10003612&InitialSearch=yes&sts=pi>

Hope you’re feeling the love.

Thank you for your time and reading my post.

That’s a wrap, fade to black.

Share this post with your friends:
Share on facebook
Share on twitter
Share on linkedin
Share on email

You might also like:

Thanks to our partners who make Photofocus possible:

Drobo – Drobo is the smartest storage solution in the world. Drobo is storage that protects data — photos, videos and everything else — from hard drive failure. Drobo is peace of mind for the working pro or serious amateur who have a lot of external drives cluttering up the desktop. Save 10% with the coupon code PHOTOFOCUS.

Lume Cube – Proudly known as the World’s Most Versatile Light™, Lume Cube represents the future of LED Lighting. Check out the new Lume Cube STROBE, offering anti-collison lighting for drones!

Backblaze – Get peace of mind knowing your files are backed up securely in the cloud. Back up your Mac or PC just $6/month.

B&H – B&H is a world renowned supplier of all the gear photographers, videographers, and cinematographers need and want to create their very best work.

Skylum – Your photos, more beautiful in minutes. Makers of Luminar, Aurora and Photolemur, Skylum adapts to your style and skill level. Check out the new Luminar 3, now available.

Perfectly Clear Complete – Built for precision. Made for beauty. Perfectly Clear has mastered the science of intelligent image correction – creating superior quality photos in record time, so you can get back to doing what you really love…in no time. Special Photofocus deal here.

Viewbug – Learn and improve your photography with over 500 videos. Trusted by millions around the world, join over 2 million photographers who already use Viewbug.