During the day, I saw this incredible barn. I knew I wanted it to glow from within, shining through the gaps in the wall. I also wanted a couple of the signs in the front-illuminated for good measure. I’ll tell you how I illuminated this in just five easy steps.
Step 1: Setting the light for maximum brightness
I set my ProtoMachines LED2 light painting device to its highest setting. I also set it for a warm white light. If you do not have one of these, you certainly can use a regular LED flashlight that is bright. If you want a slightly warmer light, you can hold a gel or something warmly colored over it.
Step 2: Illuminating the interior
I activated my light after stepping inside. This allowed me to see where I was going and, of course, begin illuminating while not shining any lights outside.
Step 3: Illuminating the front room elements
The very front had some walls and various equipment. I illuminated those first. I stood from the left of the door and swept across their surfaces, being sure to “paint” them with light evenly.
Step 4: Keeping the light moving
I then walked through the downstairs and upstairs. I made sure to “light paint” all the walls and the roof. I wanted to do this evenly. To do this, I kept the light moving so there wouldn’t be “hot spots,” or parts that were glaringly bright.
I knew that if I illuminated everything very evenly, it would shine through the cracks of the wall evenly and look beautiful. I also of course shined the light back at the wall to make sure that it would create shadows on the ground in front.
Step 5: Highlighting the signs
I wanted the front of the barn to be dark. The one exception was the Texaco and Coca-Cola signs. How would I illuminate these only from so far away? I simply cupped my hand over the light to direct the beam of the light toward the signs.
I also blocked the light from inadvertently shining into the camera lens by shielding the light with my body. I only spent several seconds on each sign. Nothing more was necessary. I kept everything else dark.
I sent a photo to the owners. They absolutely love it and say they have never seen their barn like that before.
If you have any questions, please feel free to ask in the comments below! I hope you have fun trying your hand at light painting.
