Shooting tethered means that your camera is connected to a computer and the pictures are saved to the computer while you shoot. You can do this by using a long USB cable or sometimes an ethernet cable from the camera to the computer. If you’re using a Lumix camera, though, you’ve got to buy Promote Systems software to tether with a cable.
Or, you can just connect to your computer wirelessly anywhere in the world with camera’s built-in wifi. Here’s how to do it on a Mac–I’d love some help from you writing this up for a Windows machine.
Setup the Computer
Find or create a folder you want your pictures to end up in (if you want to use Lightroom to Auto Import from this folder, it’s going to need to be empty).
Right click on the folder and check the box for Shared folder.
Now head to the System Preferences and choose Sharing.
Change your computer name to something very short so it’s easy to enter on the camera below. Type a new name in the bar then click Edit. (You’ll also be entering your computer’s log on password, so you might consider changing that to something easy to enter on the camera.)
Make sure File Sharing is on. Under Shared Folders, select the folder you jsut made and make sure it’s set to Everyone and Read & Write.
Go back to the System Preferences and choose Network.
Activate the button that says Show Wi-Fi status in menu bar–this will make it easier to select the camera’s wifi signal below.
Choose the Advanced button at the bottom and click on the WINS tab.
The NetBIOS Name should be the name you made above in Sharing. Workgroup should say WORKGROUP.
Setup the Camera Wifi
On your camera, go to the Menu and go into the Wrench Menu (it’s got an icon that looks like a wrench).
Choose the Wi-Fi menu (if you don’t see a wifi menu, then your camera can’t do wireless tethering).
Choose Wi-Fi Function then New Connection.
Choose Send Images While Recording then PC then Direct then Manual.
Back on the computer, choose the GH5-XXXXXX from the Wifi options in your Menu Bar. The name will be unique to your camera. Enter the password showing on your camera’s screen. It may take a few seconds for the GH5 signal to show up on your computer.
Now the camera will read, “Searching…”. Press the Menu/Set button, and wait while it says “Please wait..”. Click Manual Input and then enter your computer’s NetBIOS Name from above and then select Set.
Choose your shared folder, then type in your computer’s name–the name you use when you log on–and your password. Then choose Exit.
Now you’re ready to shoot with your camera and have all your photos transferred to the computer. This should work with all Lumix cameras capable of Wifi and I’ve personally used it with the GX8, GH5, GH4, and GX85. It works on both RAW or JPEG images, and the pictures are recorded to your SD card at the same time, so you’ve actually got two copies. Next time you want to shoot tethered to your PC, you can simply choose your PC from the History menu in the camera (if you use the same folder–if you change the folder, you’ll have to go through the process above again). Shooting tethered is a great tool so you can see your pictures in full resolution immediately. You’re going to love this technique.
The Mirrorless Camera Maniac publishes each week–check them out right here.
Levi is honored to be an ambassador for Lumix cameras, Vanguard tripods and bags and Spider Holster carry systems.
Latest posts by Levi Sim (see all)
- Portrait Tips: Avoid creepy eyes - October 10, 2018
- How to get perfect detail and tones in environmental portraits - October 9, 2018
- Heartening statistics about photography use - October 6, 2018