I do a lot of landscape photography, and with that, I also do use HDRHigh Dynamic Range photographyto make some of my images. I do my best to keep the processing as minimal as possible, without “nuking” or over-saturating the end result. It can be easy to be heavy-handed with HDR processing, so in this article I wanted to share my process and what I do to make my photographs look their best.
Note: This is just one way to process an HDR photograph.
Step 1:
Bracket Your Exposure
In order to process a photo with HDR, you need to photograph it the right way. By “right way” I am referring to bracketing your exposures and having at least three photographs to work from (in this example, I have seven). When you bracket your exposures, it means that you create several frames of the same at different levels of exposure. In this example, I have a set of seven photographs exposed from -3 EV to +3 EV, which means that three of them are underexposed (-3, -2, -1), one of them is exposed as the camera thought it should be (0), and three of them are overexposed (+1, +2, +3).
To set up your camera for photographing bracketed images, please refer to your user’s manual.
Step 2:
Set up Lightroom to edit as TIFF files
In order to take full advantage of HDR processing using Lightroom and Photoshop, then you will definitely want to make sure that your settings are set up properly. What I love about the little “HDR dance” that these two programs perform is that it allows you to start in Lightroom, merge the files to Photoshop, then back into Lightroom with a file that has SO MUCH exposure data inside of it. The way to do this properly is to make sure that you are working with TIFF files once the images go into Photoshop:
- First, go to the Lightroom Preferences window:
Mac: go to Lightroom > Preferences
PC: go to Edit > Preferences - Then, click on the “External Editing” tab.
- Make sure that the “File Format” at the top is set to “TIFF”. This will allow your photographs that are processed as HDR in Photoshop to retain all tonal data from the multiple exposures.
Step 3:
Use Lightroom to Prep You Photographs for HDR
When I process an HDR photo, my preference is to start them all inside of Lightroom. When you process your images, it is very important that the only setting you change is the white balance. And, if you change the white balance in one image, you need to change it with all of them so that they are identical. Don’t touch anything else, especially the tone settings! (Ok, you can adjust the lens correction, just make sure that they are all corrected the same way.)
One really good way to do this in Lightroom is in the Library Module’s “Quick Develop” panel:
- Highlight all of the images, press the “E” button and then scroll to the one photo that you can see best (usually the 0 EV setting image).
- In the bottom-right, flip the switch where it says “Sync” so that it is set to “Auto Sync”.
- Then, in the Quick Develop panel, make sure that you can see the expanded White Balance settings. Use the arrows to adjust your white balance with the image in the preview window, and (assuming that all of the photos are highlighted) it should automatically sync the changes with the other photos.
Step 4:
“Merge to HDR Pro in Photoshop”
Once your files are ready to go, the next step is to push them to Photoshop to let it do its magic. Here’s how:
- First, make sure that all of the photos are still highlighted.
- Then, go to “Photo > Edit In > Merge to HDR Pro in Photoshop”.
After all of the photos bounce into Photoshop, they will end at the “Merge to HDR Pro” window. In this window, make sure that you have the “Mode” set to 32-bit, and that the check-box below the histogram is un-checked. (You can check the “remove ghosts” button if you had moving objects in your scene, such as leaves or people.) Then, click OK.
Your photo will now be in a standard Photoshop window. Save the file and close it, and then go back to into Lightroom.
Step 5:
Processing the TIFF File in Lightroom
Now, back in Lightroom, locate the newly-created TIFF file. It should pop up somewhere nearby your original images; if not, just sort the images by File Name (View > Sort > File Name) and it should re-appear in the correct place. This is my photo in Lightroom after saving and closing it from Photoshop:
Because you have a 32-bit TIFF file, this means that all of the tonal data from the bracketed images is inside of your image. So, as long as you don’t push your adjustments too far, you should be able to pull out a LOT of detail from the image. With this example, you can see that the “straight out of HDR Photomerge” photo really doesn’t look too much different from one of the other bracketed frames. The image on the left is the HDR processed TIFF file, while the image on the right is the 0 EV image with no adjustments:
The HUGE difference between these two is the amount of data inside of the TIFF file. The reason that this HDR process is so great is that I can process the TIFF file by doing things such as lightening up the shadows, darkening the sky, etc, with very little (to no) detriment to the images. If I were to apply the same adjustments to the standalone file (the 0 EV image) then it starts to really show, especially when you zoom in to view it at 100%.
For this TIFF file, I processed it in the Develop module’s Basic Panel with the following changes to bring out the shadows and darken some of the bright areas:
Step 6:
Style and Process as you like
After you’ve gone through the steps of processing the TIFF file to bring it to a good balance of tone and color, you can do whatever stylization you like. For me, that may be some more in-depth editing inside of Lightroom, or I might push it to onOne Software’s Perfect Effects to play with it from there.
Here’s my final photograph, processed as an HDR through Lightroom and Photoshop, with final touches added using onOne Software’s Perfect Effects 8 and Lightroom 5:
When I select my photos, apply sync, and then go to the photo that “looks best” and change the white balance, once the HDR comes back from photoshop, the values are different.
1. Why?
2. Why even adjust the white balance etc, before the HDR process?
3. Thanks!
The act of merging HDR files changes them… you will need to re-white balance the HDR file after the merge.
One more thing. How come the processed HDR image in photoshop is always so “bright” but then the import back to lightroom looks “dark?”
Thank you
Can depend on the color profile you’ve assigned
Thank you Richard. Any suggestions for me including color profile settings in both programs? Thanks again.
Calibrate your monitor with an external calibrator and use both under Color Management settings.
Thx for the tip. I did found a nice spot yesterday afternoon, and I didn´t really like PS hdr before, and it was the only way to merge this exposures. But when u can edit in lightroom after the PS process, did the photograph much more credible :)
Thank you Richard. Any suggestions for me including color profile settings in both programs? Thanks again.
Calibrate your monitor with an external calibrator and use both under Color Management settings.
When I select my photos, apply sync, and then go to the photo that “looks best” and change the white balance, once the HDR comes back from photoshop, the values are different.
1. Why?
2. Why even adjust the white balance etc, before the HDR process?
3. Thanks!
The act of merging HDR files changes them… you will need to re-white balance the HDR file after the merge.
Thx for the tip. I did found a nice spot yesterday afternoon, and I didn´t really like PS hdr before, and it was the only way to merge this exposures. But when u can edit in lightroom after the PS process, did the photograph much more credible :)
One more thing. How come the processed HDR image in photoshop is always so “bright” but then the import back to lightroom looks “dark?”
Thank you
Can depend on the color profile you’ve assigned
What I do is select the photos to be merged in Lightroom 2, next I right click and choose edit in Photoshop CS3. Now being in Photoshop I choose automate and then merge my files to HDR. The last step is to print a TIFF file…Julian