This image shows the transition of a darkened silhouette, where the image was exposed for the sky, all the way to an image where the metering was set to the foreground.
A silhouette can make a beautiful photographthey are a true minimalistic image, and can even evoke a feeling of mystery or suspense. And, the good thing is that they are relatively simple to create!
The basics of creating a silhouette is that your background will need to be brighter than your foreground and subject. Most of the time, when you are outdoors on a sunny day, this won’t be a problem. If you are photographing with studio lights or artificial light, then you will want to be sure that your background is lit more than your subject by several stops; for example, if a proper exposure on your subject would be f/4, but your background meters at f/16 (a difference of four stops) then it’s likely that you will underexpose and darken your subject to create a silhouette (so long as you set your camera to f/16).
To set your camera properly for a silhouette, you want to meter for the sky (or the background, whatever is the brightest part of your scene behind the subject). This will involve an understanding of your camera and metering modes, as well as camera functions such as AE lock and exposure compensation. To help get you started, here are some of the metering modes you can use, some you should avoid and also a workarounds to an exposure that may not be working out for you:
- Evaluative or Matrix Metering: This is the “standard” metering mode for most cameras and may work perfectly for your silhouette. This mode averages the exposure for your entire scene, so if the background or sky is the largest portion of your scene, then you’ll probably be okay with using this metering mode on your silhouette. If a large part of your image is your subject and/or foreground, then you may end up with an overexposed silhouette.
- Partial and/or Center Weighted Metering: This will weigh the metering of your scene in the center of your viewfinder and expose for that area. It can be a good metering mode to use if your subject is off-center and the sky is the most prominent portion of the center of your scene. However if your subject is in the center of your frame then it might not be the best for a silhouette.
- Spot Metering: Spot metering can be great choice for silhouettesif you know how to use it, that is. This metering mode will pull a very small portion of the frameeither from the very center of the viewfinder, or from your focus pointand meter from that spot. If this spot is sitting over your subject, then you will not end up with a silhouette but rather a very blown-out background. If you know how to use your AE lock button (“Autoexposure” Lock), which is typically the little button with the asterisks on it near your right thumb when holding a DSLR, then that is an excellent way to ensure a good silhouette exposure. Just put the spot over your sky, press the AE lock button once and then focus and recompose your scene. You will likely have to re-lock the exposure for each frame, and it is also a good idea to refer to your camera manual to find out more about this feature specific to your camera model.
If you are still having difficulty getting the exposure set in-camera, then the best choice-of-action is to use your Exposure Compensation slider to underexpose your scene. Move the dot towards the minus-sign and take a few test shots to see what you’re getting. The further you push the dot towards the left, the more you will underexpose your overall exposure and eventually create a silhouette of your scene.
Note: This is just one way to achieve a silhouette. Combine with your skills for best results.